User Manual For 2015 CNC Router
 
Technical data
Dimensions
Depth(Y)[mm] 450
Width(X)[mm] 350
Height(Z)[mm] 400
Total weight [kg] 12
Work area
X[mm] 210
Y[mm] 370
Z[mm]  ≤55(The Z axis bottom and workbench spacing )
Work travel  
X[mm] 150
Y[mm] 200
Z[mm] 50
 
Water-cooled spindle  
consumption  DC110V/240W
Speed[rpm]  0~8000
Clamping diameter  3.175mm
Cooling way air-cooled 
Transmission unit 
X,Y,Z  Three axis is 1204 T screw
Sliding unit  
X  φ13
Y  φ13
Z  φ12
 
feeding speed limit[mm/min] 3000
Carving speed[mm/min] 100~3000
repeat location accuracy[mm]  ≤0.06
 
 
 
 Mach3 configuration
 
 
 
Configuration of parallel port parameter
1. Click PORT & PIN sub-menu of config menu. Please refer to Image.1
 
Image 1
 
2. Use LPT1. Enable the port as image 2 
Image 2
 
Remark:
We ususlly choose Port1, 0x378 to control. but for PCI parallel card or special
situation, Please set according to the relative property of device manager. If
there is no print port of your computer:
（1）for Laptops. You can choose PCMCIA to LPT card. 
（2）for Deaktops. You can choose PCI or ISA to LPT card.
Note:    LPT transfered by USB interface can not be used to control the machine.
 
3. Define the configuration Scripting of PORT & PIN, please refer to image3,4
 
Image 3
 
Image 4
 
 
 
 
二. Configuration of motor parameter
 
 
 Modify the motor parameter of all X、Y、Z aixs. Each axis parameter Settings,  Must press the
SAVE AXIS SETTINGS button to be saved 
Please refer to image 6
 
Image 6
 
 
三、Operate the machine
1.You may see the red button  RESET flashing. Click  RESET to stop the
flashing
 
 
2.Use the system shortcuts to move the axis  
Keyboard  Function
LeftArrow Key ← X--
RightArrow Key→ X++
UpArrow Key↑ Y--
DownArrow Key↓ Y++
PageUpKey Z++
PageDownKey Z--
EscKey Emergency Stop